MENUCLOSE

Free The Tone Free The Tone

OVERDRIVE

FREE THE TONE’s first low-gain drive pedal “RED JASPER” Smooth highs, punchy mids, full but tight lows, sensitive, responsive, natural and pleasing compression feel. FREE THE TONE’s first low gain overdrive pedal “RED JASPER” has been designed to obtain these magical attributes that only superb vintage tube amps can usually produce.

The RED JASPER amplifies the guitar’s original sound faithfully, adopting a passive type tone circuit to minimize phase errors in the guitar signal and obtain a natural tone. With first priority placed on sound, a slightly larger die-cast case is adopted.

Try the RED JASPER overdrive pedal and experience how it can “amplify” all of the information created by the guitarist’s fingertips and connect to the player’s emotions.

FEATURE

  • By implementing the HTS (Holistic Tonal Solution) Circuit that manages signals comprehensively from input to output, the effected sound and bypassed sound will always have the same sound quality, which solves a problem that has plagued players for years.
  • Passive type tone circuit to minimize phase errors in the guitar signal.
  • Astoundingly excellent Signal-to-Noise ratio.
  • Exceptional sound stability by using long-life high reliability components.
HTS (Holistic Tonal Solution) Circuit
The newly developed FREE THE TONE’s Holistic Tonal Solution (HTS) Circuit brings a brand new concept to effect pedals.

The HTS Circuit mainly handles the interface section of an effects unit (input and output). This circuit solves not only the problem with a True-Bypass circuit and weak points in a combination of a general buffer circuit and an electronic switch, but also totally and effectively manages the relationship between devices connected before and after the effects unit and the operation of the effects circuit implemented in the HTS Circuit.

The compatibility of pedals when they are connected together will be influenced by the signal level and the characteristics of the input and output impedance. Signal characteristics may change each time you switch effects units on some combinations of effects units using a true-bypass circuit. These changes in signal characteristics will have a drastic influence on the sound quality and/or sound image. You may have felt a fundamental difference in sound quality or a feeling that something just isn't right in the past. This is a major problem of effects units that is relatively unknown.

The HTS Circuit consists of three separate circuits: Input Circuit, Noiseless Effect On/Off Circuit, and Output Driver Circuit.

The Input Circuit receives the signal properly according to the conditions of the signal source, eliminates noise from unnecessary frequency bands and then sends the pure guitar signal to the effect circuit. The FREE THE TONE effects units have a very low signal-to-noise ratio thanks to the HTS Circuit.

The processed signal is sent to the Noiseless Effect On/Off Circuit. This circuit transfers the guitar sound faithfully without any feeling of dullness or distortion that is often unique to electronic switching circuits, because no switching element, such as an FET, is used.

The processed or bypassed sound signal, selected by the Noiseless Effect On/Off Circuit, is sent to the Output Driver Circuit and then to any other equipment connected after the effector in the signal chain. Regardless of whether the effects unit is on or off, the signal output impedance remains fixed so that a stable signal is provided all the time. And when the effects unit is turned off, the HTS Circuit outputs a signal that remains true to the original natural guitar sound.

HThe effected sound and bypassed sound managed by the HTS Circuit will always have the same sound quality, which solves a problem that has plagued players for years.

SPECIFICATIONS

  • Input impedance: 1MΩ
  • Output load impedance: min. 10kΩ
  • Controls: DRIVE, HI-CUT, LEVEL
  • Terminals: 2× 1/4" phone jacks (for input and output), 1× DC9V input jack (for AC adapter)
  • Power supply: 9-volt battery (PP3/006P), AC adapter
  • Current consumption: approx. 15 mA
  • Dimensions: 100W × 123D × 53H mm (incl. protuberances such as footswitches, jacks, etc.)
  • Weight: approx. 320 g (excl. battery)
  • Accessories: warranty card, manual, battery (PP3/006P), 4× rubber feet

DEMO