Model MB-5
Manual MB-5 MIDI THRU BOX Manual
  • MIDI THRU BOX Yen16,000.-

MIDI is common to many guitar/bass devices these days. Here at FREE THE TONE, we adopt MIDI devices in most of our custom pedalboards
and rack systems.
There is usually no problem if you have only one MIDI receiving device in your system. However if your system has multiple MIDI devices and if all of the MIDI signal wirings are done serially, MIDI data transmission requires a certain amount of time which can result in a delay or a malfunction.
The MB-5 receives one stream of MIDI data and splits it into five to enable parallel data transmission. By receiving MIDI data directly from the MB-5, your devices can avoid various problems that can occur if it is serially connected.
The wave shape of the MIDI signal fed into the MB-5 is correcte d by its internal logic circuit, preventing transmission errors due to deteriorated data wave shape.


  • By connecting MIDI data in parallel via the MB-5, you can avoid data delay or malfunction that may occur when multiple MIDI devices are
    serially connected.
  • The incoming MIDI signal’s waveform is reshaped by going through the logic circuit in the MB-5, preventing transmission error du e to
    deteriorated data wave shape.


Terminals: 6× DIN 5-pin connectors (1× MIDI IN, 5× MIDI OUT)
Power supply: 9V DC center negative polarity*
Current consumption: approx. 8 mA
Dimensions: 100W × 52D × 30H mm
Weight: approx. 200 g (excl. accessories)
Accessories: warranty card, Web Access Card