DOWNLOAD

OVERDRIVE
STRING SLINGER SS-1V
-
Manual
-
STRING SLINGER SS-1V Manual(278KB)
-

OVERDRIVE
FIRE MIST FM-1V
-
Manual
-
FIRE MIST FM-1V Manual(274KB)
-

BASS OVERDRIVE
BLACK VEHICLE BV-1V
-
Manual
-
BLACK VEHICLE BV-1V Manual(439KB)
-

PITCH SHIFTABLE SHORT LOOPER
MOTION LOOP ML-1L
-
Manual
-
MOTION LOOP Manual(462KB)

FULL-ROTATION BELT-DRIVE SYSTEM
DVL-1 SERIES / DIRECT VOLUME
-
Manual

RF PHASE MODULATION DELAY
FUTURE FACTORY FF-1Y
- FUTURE FACTORY FF-1Y Firmware Version 1.2 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you saw on your FUTURE FACTORY's display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Supplementary Notes to FUTURE FACTORY Firmware Version 1.2
Click here to download the Firmware Update Procedure Manual
Changes :
*A function to synchronize the panning speed to the delay time has been added.
*For a situation in which operators do not want to output the incoming signal when the effect is turned off, a setting in which the input signal can be easily turned off (in muted status) has been added.
*A function to mute the pitch-shifted delay sound while the delay time is being adjusted is added.
*A setting that disables the MIX/EXT1 and FEEDBACK/EXT2 knobs has been added.- DOWNLOAD(392KB)

PROGRAMMABLE ANALOG 10 BAND EQ
PA-1Q SERIES
- PA-1QG Firmware 1.01
-
・Minor software bugs have been fixed.
If the version number of the firmware to be downloaded from here is higher than the one you saw on your PA-1Q series display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Firmware Update Procedure Manual- DOWNLOAD(101KB)
- PA-1QB Firmware 1.01
-
・Minor software bugs have been fixed.
If the version number of the firmware to be downloaded from here is higher than the one you saw on your PA-1Q series display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Firmware Update Procedure Manual- DOWNLOAD(101KB)
-
Manual

DIGITAL DELAY
FLIGHT TIME FT-2Y
- FLIGHT TIME FT-2Y Firmware Version 3.1 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you saw on your FLIGHT TIME's display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Supplementary Notes to FLIGHT TIME Firmware Version 3.1
Click here to download the Firmware Update Procedure Manual
*MIDI clock supplied from an external source is now supported.
*Tempo can now be entered by tapping the TAP switch twice.
*Tap tempo entry range is extended from 30–300 BPM to 30–600 BPM and , Tap-entry for short delay is now possible.- DOWNLOAD(353KB)
- FLIGHT TIME FT-2Y Firmware Version 2.1 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you see on your FLIGHT TIME’s display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Firmware Update Procedure Manual
・Minor software bugs have been fixed.- DOWNLOAD(351KB)
- FLIGHT TIME FT-2Y Firmware Version 2.0 Download
-
・A backup memory area has been added to protect Preset Data data in the event of a loss of power.
・Improved stability when operating the FLIGHT TIME with external MIDI equipment.
・Minor software bugs have been fixed.
If the version number of the firmware to be downloaded from here is higher than the one you saw on your FLIGHT TIME’s display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.- DOWNLOAD(352KB)

DIGITAL REVERB
AMBI SPACE AS-1R
- AMBI SPACE AS-1R Firmware Version 2.1 Download
-
Please proceed to the update steps after confirming the version number of the firmware on your Ambi Space's display. After powering on, the PRESET 1-4 LEDs above the SELECT footswitches turn on and off from 1 to 4 in sequence. The current firmware version can be checked by counting the number of light-up times. If all of the PRESET 1-4 LEDs will turn on once, the AMBI SPACE is running with the ver. 2.0 firmware.
Click here to download the Supplementary Notes to AMBI SPACE Firmware Version 2.1
Click here to download the Firmware Update Procedure Manual
*The number of presets to be stored has been increased to 128.
*Reverberation sound can now be retained when the effects are turned off.
*The operation has now changed so that turning the PRE DELAY knob when the effects are turned on will not interrupt the reverberation sound.- DOWNLOAD(277KB)
- AMBI SPACE AS-1R Firmware Version 1.0 Download
-
- DOWNLOAD(276KB)
-
Manual

MULTI-DIMENSIONAL CHORUS
TRI AVATAR TA-1H
- TA-1H Firmware Version 1.2
-
・It is now possible to confirm the setting of each knob stored in a Preset.
Please proceed with the update after checking the version number of your TRI AVATAR. To check the current firmware version, after turning on the device, the PRESET 1-4 LEDs will light up and go out in order from 1 to 4. After that, all four of the PRESET 1-4 LEDs will light up and the number of times they light up will indicate the version number. If the TRI AVATAR is running the ver. 1.2 firmware, all of the PRESET 1‒4 LEDs illuminate twice and it will then start up.- DOWNLOAD(18KB)
- TA-1H Firmware Version 1.1
-
・Improved stability when operating the TRI AVATAR with external MIDI equipment.
・Minor software bugs have been fixed.
Please proceed with the update after checking the version number of your TRI AVATAR. The current firmware version can be checked by counting the number of light-up times. If the PRESET 1‒4 LEDs do not illuminate,
then the TRI AVATAR is running with the ver. 1.0 firmware. If it is running with the ver. 1.1 firmware, it will reboot after all of the 1‒4 LEDs illuminate once.
- DOWNLOAD(18KB)

GIGS BOSON GB-1V OVERDRIVE
-
Manual
-
GB-1V Manual(132KB)
-

IRON FOREST IF-1D DISTORTION
-
Manual
-
IRON FOREST IF-1D Manual(131KB)
-

RED JASPER RJ-1V OVERDRIVE
-
Manual
-
RED JASPER RJ-1V Manual(228KB)
-

MS SOV MS-2V OVERDRIVE
-
Manual
-
MS SOV MS-2V Manual(263KB)
-

FLIGHT TIME FT-1Y DIGITAL DELAY
- FLIGHT TIME FT-1Y Firmware Version 3.1 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you saw on your FLIGHT TIME's display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Supplementary Notes to FLIGHT TIME Firmware Version 3.1
Click here to download the Firmware Update Procedure Manual
*MIDI clock supplied from an external source is now supported.
*Tempo can now be entered by tapping the TAP switch twice.
*Tap tempo entry range is extended from 30–300 BPM to 30–600 BPM and , Tap-entry for short delay is now possible.- DOWNLOAD(353KB)
- FLIGHT TIME FT-1Y Firmware Version 2.1 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you see on your FLIGHT TIME’s display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Additional Notes for FLight Time FT-1Y Software Ver.2.1.
Click here to download the Firmware Update Procedure Manual
・Added the instant preset mode.(Please refer to the Additional Notes for Flight Time FT-1Y Software Ver.2.1 for the new operation.)
・Factory Preset parameter change
・A part of the MIDI function has been changed.
・Minor software bugs have been fixed.- DOWNLOAD(351KB)
- FLIGHT TIME FT-1Y Firmware Version 1.4 Download
-
If the version number of the firmware to be downloaded from here is higher than the one you saw on your FLIGHT TIME’s display, please proceed to the update steps according to the update procedure manual. If the version numbers are the same, then the latest firmware has been installed in your unit before shipment from our factory and you do not have to perform the firmware update.
Click here to download the Firmware Update Procedure Manual
・A backup memory area has been added to protect Preset Data data in the event of a loss of power.
・Improved stability when operating the FLIGHT TIME with external MIDI equipment.
・Minor software bugs have been fixed.- DOWNLOAD(338KB)
-
Manual

OVERDRIVE for BASS
BASS BLASTER BB-2
-
Manual
-
BASS BLASTER BB-2 Manual(156KB)
-

DISTORTION
QUAD ARROW QA-2
-
Manual

DISTORTION
HEAT BLASTER HB-2
-
Manual
-
HEAT BLASTER HB-2 Manual(516KB)
-

BOOSTER
FINAL BOOSTER FB-2
-
Manual
-
FINAL BOOSTER FB-2 Manual(488KB)
-

OVERDRIVE
SOV-2 OVERDRIVE
-
Manual
-
SOV-2 OVERDRIVE Manual(484KB)
-

COMPRESSOR
SILKY COMP SC-1
-
Manual
-
SILKY COMP SC-1 Manual(510KB)
-